ASO-ABF100J(B)
Model | ASO-ABF100J(B) |
---|---|
Sewing Way | Single Needle Lockstitch |
Collocation Machine Head | SIRUBA LKS-1903AN / JUKI LK-1903A , LK-1903B , LK-1903AN / BROTHER BE438FX |
Sewing Way | Single Needle Lockstitch |
Stitch Length(P) | 2.2/2.4/2.6/2.8/3.2/3.6 Standard |
Button | Type: Round Flat Button (2 holes, 4 holes) |
Button | Size :Ø8∼26mm ※Ø10mm is special specification, need to replace standard parts. |
Thickness Of Button | 1.5∼3.5mm |
Ascending Rate Of Clamp | Maximum:13mm |
Air Consumption | 30L/min |
Air Pressure | 0.5 Mpa |
Voltage | Single Phase AC200~240V 50/60Hz |
Dimensions | (W)440×(D)560×(H)280mm |
Production Capacity | Output: 2.2 sec/Button,13090 Buttons/8hr |
![](https://siruba.cn/wp-content/uploads/2019/02/ASO-ABF100J.100B-03.jpg)
All sewing image and
parameters are clearly
shown.
![](https://siruba.cn/wp-content/uploads/2019/02/ASO-ABF100J.100B-04.jpg)
Button capable of supply,
and replacement. Easy
selection design.
![](https://siruba.cn/wp-content/uploads/2019/02/ASO-ABF100J.100B-05.jpg)
Auto button size detection
and width adjustment by
stepping motor.
![](https://siruba.cn/wp-content/uploads/2019/02/ASO-ABF100J.100B-06.jpg)
Modularized feeding
clamp, for different
button size and clamp
change.
SPECIFICATION OF BUTTON
Codes of Parts | X+0.05 -0.05 | D+0.05 -0.05 | Button Holes |
ABF118 | 2.2 | 1.0 | 4 |
ABF119 | 2.2 | 1.0 | 2 |
ABF120 | 2.4 | 1.2 | 4 |
ABF121 | 2.4 | 1.2 | 2 |
ABF122 | 2.8 | 1.2 | 4 |
ABF123 | 2.8 | 1.2 | 2 |
ABF124 | 3.2 | 1.2 | 4 |
ABF125 | 3.2 | 1.2 | 2 |
ABF126 | 3.6 | 1.2 | 4 |
ABF127 | 3.6 | 1.2 | 2 |
ABF269 | 2.6 | 1.2 | 4 |
ABF270 | 2.6 | 1.2 | 2 |
![ASO-ABF100J.100B-07 ASO-ABF100J.100B-07](https://siruba.cn/wp-content/uploads/elementor/thumbs/ASO-ABF100J.100B-07-o3q770cl6w9hvur1cl98s33vv1om3iuhloil13ofg8.jpg)
BUTTON SHAPE
Available Shape of Button |
![]() |
Two sides must be have obvious differences to make sure that the machine can differentiate the front & reverse side of the buttons.The convex / concave must above 1.2mm height difference. |
Unavailable Shape of Button |
![]() |
The machine can’t identify the button when both sides are similar without obvious differences. |